Any time you are working with wood, you need to have the proper tools for whatever task you are trying to accomplish. If you’re setting up a workbench at your home to be better equipped for woodworking, multiple saws or sanders are likely to be among the first purchases you make. Hardware for your bench can be difficult to choose but something you should consider if you’re going to want cleaner edges is a Japanese pull saw. A ryoba saw as well as a dozuki saw have double sided blades that allow for you to pull them through the wood, rather than push like a typical hand saw. They are lighter and easier to maneuver in smaller areas than hand saws. For more intricate work with joints, consider any of the five Japanese pull saws we’ve hand selected below. Let’s take a look at our picks for the best Japanese pull saws on the market.
Check out our editor’s pick
By choosing the SUIZAN Japanese Pull Saw Hand Saw, you’ll be extremely pleased with your decision. It requires less power than a hand saw and this cuts materials via pulling. The resulting edges are cleaner than anything you’d get with a hand saw. This is made from top end Japanese steel that ensures that cuts that are made are sharp. This is manufactured in Japan by Japanese craftsman and the blade is 9.5″, giving you plenty of surface to use to cut. Both sides have teeth, allowing you to pull through wood easier and more efficiently. The handle is about 15″ in length, so you can hold it with one or two hands and guide it through. It does not come with a replacement blade.
Key Features:
- Requires less power than a hand saw
- Edges are cleaner
- Manufactured in Japan by Japanese craftsman
Make it easier to get into awkward areas
With a specially designed handle, the Gyokucho Razorsaw Ryoba Saw is easy to use in tighter quarters. This comes with a seven-inch blade and the handle is eight inches, meaning you’re holding 15″ of length. It is compact enough to fit in a tool bag, as the blade can be taken off to store it easier. The handle is tilted, allowing you to reach into awkward shaped areas a little easier. This has some give to it. It only weighs 4.8 ounces, so you’ll be able to pick it up without much of a problem.
Key Features:
- Seven-inch blade and eight-inch handle
- Compact enough to fit in a tool bag
- Tilted handle to get in tough spots
Handle smaller pieces of work
Use the Life Saw S-145 Flush Cutting Japanese Handsaw when you need to tackle some smaller jobs. This will help you cut dowels, pegs, through tenons, and any excess trim you may have to deal with. You don’t have to worry about this marring any surrounding area. The flexibility permits access to tight spots and the entire saw only reaches 11.8 inches. The teeth has no set, so it will cut at the surface without disfiguring it.
Key Features:
- Cut dowels, pegs, through tenons, and excess trim
- No marring any surrounding areas
- Measures 11.8″
The dovetail makes it easy
Make your job easier with the SUIZAN Japanese Dozuki Hand Saw 6 Inch. This is a pull saw like the first option, but this provides a finer cut. The blade has a dovetail design that allows you to pull it through simpler. The blade is only six inches in length, so you’ll be able to handle more intricate work. The sharp hook at the end of the blade allows you to cut into the center panel of a piece of wood. It is great for joinery work.
Key Features:
- Provides a finer cut
- Dovetail design on the blade
- Great for joinery work
Be covered in case your blade breaks
You can purchase a Ryoba 9.5″ Double Edge Razor Saw with a spare blade from Gyokucho. The spare blade will allow you to replace the original once it dulls. It has impulse hardened teeth for extended wear and the blades are 9.5″ with 1.7mm teeth pitch. You’ll be able to cut a variety of joints with this saw and its subsequent replacement. The entire set is made in Japan with high quality materials.
Key Features:
- Comes with a handle and two saw blades
- Impulse hardened teeth for extended wear
- Entire set is made in Japan
